Full Stainless Steel 8 Inch Pump End only, adaptable to 6" motor. Requires appropriate horse power motor for operation.
Fits 8" ID well casing, overall maximum diameter is 7 inches.
- HP: 30HP or larger 6" motor required
- Voltage: n/a
- Cycle: 60 Hz
- Operating Amperage: n/a
- Motor RPM: 3450 RPM
- Stages: 3
- Maximum Head (cut off): 300 ft.
- Maximum Flow( 0-100 ft.): 580 GPM
- Rated Flow: 450GPM
- Free Flow Rate: 500GPM @ 175ft; 450GPM @ 195ft; 400GPM @ 202ft; 300GPM @ 238 ft; 200GPM @ 260ft.
- Suction Port: Center Suction
- Discharge Port: 5 inch NPT Female
- Built-in Check-valve: Yes, S.S. 304
- Housing Material: Stainless Steel 304
- Impeller Material: stainless steel 304
- Motor Enclosure: n/a
- Discharge and Suction Port Material: Stainless Steel 304
- Motor Bearing / Lubrication: n/a
- Duty: Continuous or allow maximum 15 restarting cycles / hour
- Control Box: n/a
- Shipping weight: 72lbs
