6" 20HP 3-Phase 230V full Stainless Steel Enclosure Motor (water cool)

Stainless Steel Motor. Water Cool and Lubrication. Motor housing must be filled up with purified water prior to use. This full S.S. motor is for mission critical duty, it is equipped with water thrust bearing advanced technology. Running the motor at full speed is recommended. If a VFD is used, running at less than 2700 RPM is not recommended. 

Control box (control panel) is not required, but a three phase power switch with overload protection is mandatory. Includes manual.

• HP: 20HP
• NEMA Standard
• Compatible to NA major name brand products
• Voltage: 230V Three Phase
• Cycle: 60 Hz 
• Operating Amperage: 57A
• Motor RPM: 3450 RPM 
• Stages: n/a
• Maximum Flow: N/A
• Maximum Head: N/A
• Typical Flow: N/A
• Suction Port: N/A
• Discharge Port: N/A
• Built-in Check-valve: N/A
• Housing Material: Stainless Steel
• Impeller Material: N/A
• Motor Enclosure: Stainless steel
• Motor Bearing / Lubrication:  Water lubricated thrust bearing, water filled lubrication
• Duty: Continuous or up to 15 restarting cycles / hour
• Control Box: Control Box (Control Panel) not included
• Net Weight: 148 lbs

Shipping information:

Due to the motor's weight is over the 150Lb limit set by regular courier services, this item will be delivered by UPS LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck or unable to help unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest UPS Freight center for pick up to avoid the surcharges. 

Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-8 business days.

The shipping weight is around 193Lb including packing and the pallet. The motor is 165 Lb. Two person lift is required for unloading if a forklift truck is unavailable.