4" 3HP Three Phase 460V Motor, Full Stainless Steel
Tuhorse
US$380.00
US$639.00
(You save
US$259.00
)
Motor only. Control Panel sold separately
- HP: 3HP
- Voltage: 460V Three Phase
- Cycle: 60 Hz
- Operating Amperage: 5.4 A
- Motor RPM: 3450 RPM
- Stages: n/a
- Maximum Flow: N/A
- Maximum Head: N/A
- Typical Flow: N/A
- Suction Port: N/A
- Discharge Port: N/A
- Built-in Check-valve: N/A
- Motor Top Material: Stainless Steel 304
- Impeller Material: n/a
- Motor Enclosure: Stainless steel 304
- Duty: Continuous or up to 30 restarting cycles / hour
- Control Box: Three phase power switch with overload protection is required.
- Net Weight: 30 Lbs
- Dimensions/Length: 20.5"
- Shipping Weight: 33Lb
- Shipping dimensions: Vary
Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause missing phase problem.
1 Year