30HP TH6-110-14, 460V 3-Phase Pump-end and Motor

 Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Complete Instructions.

 Model: TH6-110-14

• HP: 30HP
• Voltage: 460V Three Phase
• Cycle: 60 Hz
• Operating Amperage: 35.4 A
• Motor RPM: 3450 RPM
• Stages: 14
• Maximum Head(cut off): 1000 ft
• Rated Flow: 110GPM
• Maximum Flow(0-430ft.): 132 GPM
• Open Flow vs Depth: 120GPM @ 520ft; 110GPM @ 590ft; 100GPM @ 660 ft; 93GPM @ 700ft; 80GPM @ 770ft; 70GPM @ 800ft.
• Suction Port: Center Suction
• Discharge Port: 2.5 inch NPT Female
• Built-in Check-valve: Yes
• Housing Material: Stainless Steel
• Impeller Material: Thermal Plastic
• Motor Enclosure: Stainless steel
• Duty: Continuous or up to 15 restarting cycles / hour
• Control Box: Three phase power switch with overload protection is required(not included)
• Weight: 220 lbs
• Dimensions/Length: N/A

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss problem.

Shipping information:

Due to the weight is over the 150Lb limit set by regular courier services, this item will be delivered by UPS LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest UPS Freight centre for pick up to avoid the surcharges. 

Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-8 business days.

The shipping weight is around 250Lb including packing and the pallet. The motor is 184 Lb. Two person lift is required for unloading if a forklift truck is unavailable.