6" Submersible pump, stainless steel wet-end and motor, water filled cooling

10HP TS6-200-03A 230V 3-Phase, Pump-end and Motor w/ Stainless Steel Impellers

Tuhorse
SKU:
TS620003T230A
CAD$2,251.49
CAD$4,250.26
(You save CAD$1,998.77 )
(No reviews yet)
Weight:
130.00 LBS
Condition:
New
Current Stock:
Adding to cart… The item has been added
Description

 Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. 

  • HP: 10HP
  • Voltage: 230V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 26.4A
  • Motor RPM: 3450 RPM
  • Stages: 3
  • Maximum Head (cut off): 200 ft
  • Rated Flow: 200GPM
  • Maximum Flow( 0-100 ft.): 290 GPM
  • Free Flow Rate: 250GPM @ 130ft; 230GPM @ 140ft; 200GPM @ 158ft; 150GPM @ 178ft; 100GPM @ 190 ft.
  • Suction Port: Center Suction
  • Discharge Port: 4 inch NPT Female
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel 304
  • Impeller Material: stainless steel 304
  • Motor Enclosure: Stainless steel 304
  • Discharge and Suction Port Material:  Stainless Steel 304
  • Duty: Continuous or allow maximum 15 restarting cycles / hour
  • Motor Bearing / Lubrication:  Ball bearing, oil filled lubrication
  • Control Box: Three phase power switch with overload protection is required(not included)
  • Net Weight: 120 lbs
  • Shipping weight: 129 Lbs
  • Dimensions/Length(pump and motor assembly): 
  • Shipping Dimensions:

 

Recommended control panel (optional purchase) :https://www.tuhorse.us/submersible-pumps/6-inch-deep-well-pumps/10hp-control-panel-230v-3-phase-with-manual-automatic-water-level-control/

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.

 

* Not exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.

 

 

Warranty
1 Year