6" Submersible pump, stainless steel wet-end and motor, water filled cooling

10HP TS6-150-05A 460V 3-Phase, Pump-end and Motor w/ Stainless Steel Impellers

Tuhorse
SKU:
TS615005T460A
CAD$2,252.93
CAD$4,293.34
(You save CAD$2,040.41 )
(No reviews yet)
Weight:
129.00 LBS
Condition:
New
Current Stock:
Adding to cart… The item has been added
Description

 Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.

 

  • HP: 10HP
  • Voltage: 460V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 15.5A
  • Motor RPM: 3450 RPM
  • Stages: 5
  • Maximum Head (cut off): 330 ft.
  • Rated Flow: 150GPM
  • Maximum Flow( 0-100 ft.): 220 GPM
  • Free Flow Rate: 180GPM @ 160ft; 150GPM @ 205ft; 130GPM @ 250ft; 100GPM @ 276 ft; 70GPM @ 300ft.
  • Suction Port: Center Suction
  • Discharge Port: 3 inch NPT Female
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel 304
  • Impeller Material: stainless steel 304
  • Motor Enclosure: Stainless steel 304
  • Discharge and Suction Port Material:  Stainless Steel 304
  • Motor Bearing / Lubrication:  Ball bearing, Oil filled lubrication
  • Duty: Continuous or allow maximum 15 restarting cycles / hour
  • Control Box: Three phase power switch with overload protection is required(not included)
  • Net Weight: 115 lbs
  • Shipping weight: 129 Lbs
  • Dimensions/Length(pump and motor assembly): 
  • Shipping Dimensions: Motor and pump separately packed

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.

* Not exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.

 

Warranty
1 Year