4" Tuhorse deep well submersible well pump

5HP TH4-009-30 230V 1-Phase. Pump-end and Motor

Tuhorse
SKU:
TH400930M230
US$749.00
US$1,390.00
(You save US$641.00 )
(No reviews yet)
Weight:
59.00 LBS
Width:
40.00 (in)
Height:
11.00 (in)
Depth:
7.50 (in)
Condition:
New
Current Stock:
Adding to cart… The item has been added
Description

Complete pump end and motor set. Control box (control box sold separately).

 

  • Model: TH4-009-30 M230V
  • HP: 5HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 24.5 A
  • Motor RPM: 3450 RPM
  • Stages: 30
  • Maximum Flow: 14.1 GPM
  • Maximum Head: 1130 ft
  • Typical Flow: 13GPM @ 320ft; 11GPM @ 580ft; 9GPM @ 780ft; 7GPM @ 960ft; 5GPM @ 1060ft.
  • Suction Port: Center Suction
  • Discharge Port: 1.25 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 20 restarting cycles / hour
  • Control Box: Required, Sold separately
  • Shipping Weight: 59 lbs
  • Packing Dimensions/Length: 42" x 11" x 7"

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss problem.

Warranty
1 Year