5.5HP TH4-045-12 460V 3-Phase Pump-end and Motor
Tuhorse
CAD$1,057.74
CAD$1,957.18
(You save
CAD$899.44
)
(No reviews yet)
Write a Review
Tuhorse
5.5HP TH4-045-12 460V 3-Phase Pump-end and Motor
Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Complete Instructions.
- HP: 5.5HP
- Voltage: 460V Three Phase
- Cycle: 60 Hz
- Operating Amperage: 8.6 A
- Motor RPM: 3450 RPM
- Stages: 12
- Maximum Flow: 53 GPM
- Maximum Head: 426 ft
- Typical Flow: 26GPM @ 357ft; 37GPM @ 314ft; 48GPM @ 225ft
- Suction Port: Center Suction
- Discharge Port: 2 in
- Built-in Check-valve: Yes
- Housing Material: Stainless Steel
- Impeller Material: Thermal Plastic
- Motor Enclosure: Stainless steel
- Duty: Continuous or up to 30 restarting cycles / hour
- Control Box: Three phase power switch with overload protection is required.
- Weight: 61.6 lbs
- Dimensions/Length: 58"
Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause missing phase problem.
1 Year
