4" Tuhorse deep well submersible well pump

3HP TH4-030-11 460V 3Ph. Pump-end and Motor

Tuhorse
SKU:
TH403011T460
CAD$825.64
CAD$1,378.46
(You save CAD$552.82 )
(No reviews yet)
Weight:
49.00 LBS
Width:
38.60 (in)
Height:
11.00 (in)
Depth:
7.50 (in)
Condition:
New
Current Stock:
Adding to cart… The item has been added
Description

30GPM rated, Max 40GPM Deep Well Pump

Pump-end and motor. Complete Instructions.

 

  • HP: 3HP
  • Voltage: 460V 3-Phase
  • Cycle: 60 Hz
  • Operating Amperage: 4.6 A
  • Motor RPM: 3450 RPM
  • Stages: 11
  • Maximum Head(cut off): 360 ft
  • Maximum Flow(0-100feet): 40 GPM
  • Free Flow Rates: 35GPM @ 180ft; 30GPM @ 250ft; 25GPM @ 300ft
  • Suction Port: Center Suction
  • Discharge Port: 1.5 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel, Grade 304
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel, Grade 304
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Panel: Three phase power switch with overload protection is required
  • Weight: 50.60 lbs
  • Dimensions/Length: 43"

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss problem.

Warranty
1 Year