3" 1HP TH3-010-18 230V 1Ph. Complete Set incl motor, pump-end and control box

This 3 inch pump saved my customer the price of drilling a new well. The splice kit did not work. the shrink tubing is to big for the small wire from the pump. I used anchor epoxy filled shrink tubing. Service and support from the company is exellent.

This is a small diameter pump 2 7/8 od This little pump works great for tight holes pumps great and in my well at 160 feet produce's 12 GPM.THANKS FOR A GREAT PRODUCT

Awesome product. Easy to install and excellent workmanship. Our friend who owns a pump company took all the information on this pump for future orders, he was really impressed.Thank you for making my life easier with this product. We had an above ground pump that had to be primed everytime we went to our camp. Not at all a fun job. Now we just flip the switch. Thanks again.

Awesome product at a more than just right price!! Somewhat easy to install as well! Would put that into anyone's deep well any day!

I installed the pump in a 3" pipe casting in 65 ft deep water well for my rainbird sprinkler system. Have about 6 heads running on each zone. So far doing a good job! I was impressed at the quality of the pump and control box.hope they keep making this unit.So I can buy my next pump from them. I live in south Ala. and received mine in eight days with regular UPS shipping. Great job!

replaced a 4" well pump that could not be lowered any deeper than 150' into an OLD 6" steel windmill well casing. The 3" was successfully installed at a depth of 205' and is performing well so far. Total continuous run time was 3 hours with now slow down in the capacity of about 8gpm. Installed with 1" 160psi poly pipe and 2 check valves. Pleased with purchase and look forward to pump running for many years.

I have the pump installed in a shallow well and it is performing good at this writing. I did have to pull pump back up to last joint of pipe and retighten as it was unscrewing the pipe, almost lost the connection. I called a local pump installer and was instructed to get connections as tight as possible. As far as the Tuhorse goes, I have not had any trouble yet. Product seams to be of excellent quality. Shipping was very fast and unit was packed very good. Unit had good instructions and illustrations. Thanks for a good product Jess A Comments from Tuhorse tech support: Do not screw the pipe too much into the discharge as that could block the internal check valve from opening. Tuhorse pumps require an external check valve installed in line, anywhere from 0 to 25 feet above the pump's discharge when the pump is used in a water tight system (e.g. in a domestic water system with a pressure tank).

my first submersible pump. replaced a gould's jet pump that I had on my 3 in casing. works fine and supplies plenty of water.

I installed the pump a few days ago and it seems to be working really good. It pumps the water really fast.