3HP 230V 1 Phase Deluxe Control Box for Tuhorse, Compatible Replacement for Franklin 2823028310 and Goulds CB30412MC (TCB30M230DLX)
Sale

3HP 230V 1 Phase Deluxe Control Box for Tuhorse, Compatible Replacement for Franklin 2823028310 and Goulds CB30412MC

Tuhorse
SKU:
TCB30M230DLX
US$339.00 US$189.00
(1 review)
Weight:
16.00 LBS
Width:
16.00 (in)
Height:
9.50 (in)
Depth:
12.00 (in)
Condition:
New
Current Stock:
Adding to cart… The item has been added
Description

3HP Deluxe Control box featuring:

Magnetic Contactor driven by internal 24V safe-voltage for connecting to pressure switch, float switch, toggle switch or other pilot device.

This Deluxe Control Box is for Tuhorse 3HP 1-phase deep well pump and is compatible to 3HP Franklin Deluxe Control Box 2823028310, Goulds CentriPro CB30412MC, Pentek Sta-Rite SMC-CRP3021, and more. A Magnetic Contactor and a 230V to 24V transformer for driving the magnetic coil are included in the Deluxe Control Box.  Detail wiring diagrams are in the box as well.

Metal cased. Contains a start (208-250uF) and run (45uF) capacitor, CSCR. Supports 3HP submersible deep well water pumps running on 230V single phase. Supports 14 to 4 gauge wire (14 to 4 AWG). Pole/Wall Mountable.

  • HP: 3HP
  • Voltage: 230V 1-Phase
  • Cycle: 60 Hz
  • Operating Amperage: up to 18A
  • Motor RPM: n/a
  • Stages: n/a
  • Maximum Flow: n/a
  • Maximum Head: n/a
  • Typical Flow: n/a
  • Suction Port: n/a
  • Discharge Port: n/a
  • Built-in Check-valve: n/a
  • Housing Material: steel
  • Knockout for wire: two 1"/1.25" , one 3/4"
  • Impeller Material: n/a
  • Motor Enclosure: n/a
  • Duty: n/a
  • Control Box: Dual Capacitor Deluxe Control Box
  • Weight: 16 Lbs
  • Dimensions/Length: 14.25" x 10.25" x 6.5"
  • Shipping Dimensions: 16" x 12" x 10"
Warranty
1 Year

Reviews

  • 4
    Tuhorse 3hp deluxe control box

    Posted by Tony maida on 10th Dec 2021

    The control box was well packaged and overall satisfied my requirements at a very competitive price . My only complaints are the very large knockout openings required the use of washers to use a 3/4" tek connector fitting . Also one of the terminals in the terminal strip was stripped (factory issue) and we had to direct connect the pair of wires using that terminal . Other than that , well made product that performs as expected