3HP TH4-023-13 460V 3-Phase Pump-end and Motor

Tuhorse
SKU:
TH402313T460
US$575.00
US$960.00
(You save US$385.00 )
(No reviews yet)
Weight:
46.20 LBS
Width:
38.60 (in)
Height:
11.00 (in)
Depth:
7.50 (in)
Condition:
New
Current Stock:
Adding to cart… The item has been added

Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Complete Instructions.

 

  • HP: 3HP
  • Voltage: 460V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 5.4 A
  • Motor RPM: 3450 RPM
  • Stages: 13
  • Rate Flow: 23 GPM
  • Maximum Flow: 30 GPM
  • Maximum Head: 460 ft
  • Typical Flow: 29GPM @ 230ft; 27GPM @ 280ft; 23GPM @ 320ft;16GPM @ 390ft; 13GPM @ 305ft.
  • Suction Port: Center Suction
  • Discharge Port: 1.5 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Three phase power switch with overload protection is required.
  • Weight: 46.2 lbs
  • Dimensions/Length: 43.25"

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause missing phase problem.

1 Year